FUL-L1W1MID120D-20E

SKU: FUL-L1W1MID120D-20E Categories: ,

Product features
Wide output voltage range 6 – 42 Vdc
Wide range of current settings 100 – 1200 mA
0- 10V-, 1-10V-, potentiometer- and pulse dimming
Suitable for warm dimming (natural toning/ dim-to-warm) LEDs
Max inrush current 327 mA
Zero ripple current
Dual stage topology
Active overcurrent protection
Up to 85 % efficiency across a wide range of loads
Power factor > 0.95

Technical data
Rated supply voltage 220-240 Vac
Input voltage 180-240Vac / 150-275 Vdc
Mains frequency 50/60Hz
Output current tolerance 5%
100Hz ripple current at full load <1 % Power factor at full load> 0.9
Stand by power 350mW
Nominal line current at 240Vac110 mA
Dimming method linear
Minimum dim level 15mA
YesStartup time< 1s
Warm up time to 95% of light output< 2sec
Output isolation SELV
Surge protection(diff./comm.)2kV/6kV
IP20
Case dimensions 110mm x 52mm x 23.5mm

Inrush current
Mains max. peak inrush at full load
0.200Aper driver onphase 60º (average starting angle)
0.327A per driver on phase 90º (worst case starting angle)
0.162A per driver on phase 60º (average starting angle)
0.170A per driver on phase 90º (worst case starting angle)

FUL-L1W1MID120D-20E

£36.50 + VAT


Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)