LT-SE-20-100-700-W1A

Output Voltage: 9-42Vdc
Max Output Voltage: ≤48Vdc
Output Current Range 100-700mA
Output Power Range: 0.9W-20W
Dimming Range: 0~100%, down to 0.01%
Dimming interface: 0-10V (1-10V, 10V PWM, RX)
Input Voltage: 115Vac/230Vac
Frequency: 50/60Hz
Working Temperature ta: -20 ~ 50°C tc: 80°C

Dimension
L: 142mm W: 40mm H: 23mm

OverLoad Protection:
Automatically protect the device when the load exceeds 102% of the rated power. Automatically recover once load is reduced
Over-heat Protection:
Intelligently adjust or turn off the current output if the PCB temperature ≥110°C. When the PCB temperature <90°C, automatically recover normal output
Short Circuit:
Enter hiccup mode if short circuit occurs, and recover automatically

Housing made from SAMSUNG/COVESTRO’s V0 flame retardant PC materials.
Ultra small, thin and lightweight, screwless end cap.
Change the output current, Dimming mode and other parameters on the NFC programmer or via the App, and sync the parameters to the driver.
Set the output current down to 1mA.
Automatically recognize 0-10V and 1-10V input signal.
Ultra-low consumption of 0-10V ports < 0.05mA.
Class 2 LED driver, Safety Extra Low Voltage (SELV).
Soft-on and fade-in dimming function enhances your visual comfort.
T-PWMTM dimming technology allows quality and high-end lighting.
The whole dimming process is flicker-free with high frequency exemption level.
Comply with the EU’s ErP Directive, networked standby<0.5W.
Multiple current levels, wide voltage range, suitable for LEDs with different power.
When there is no load, the output will be 0V to prevent damage to LEDs due to poor contact.
Overheat, over voltage, overload, short circuit protection and automatic recovery.
Suitable for Class I/II/III indoor light fixtures.